SWI-Prolog SGML/XML parser
AllApplicationManualNameSummaryHelp

SWI-Prolog SGML/XML parser
Jan Wielemaker
VU University Amsterdam
University of Amsterdam
The Netherlands
E-mail: J.Wielemaker@vu.nl
Abstract
Markup languages are an increasingly important method for data-representation and exchange. This article documents the package library(sgml), a foreign library for SWI-Prolog to parse SGML and XML documents, returning information on both the document and the document's DTD. The parser is designed to be small, fast and flexible.

Table of Contents

1 Introduction
2 Bluffer's Guide
2.1 ‘Goodies' Predicates
3 Predicate Reference
3.1 Loading Structured Documents
3.2 Handling white-space
3.3 XML documents
3.3.1 XML Namespaces
3.4 DTD-Handling
3.4.1 The DOCTYPE declaration
3.5 Extracting a DTD
3.6 Parsing Primitives
3.6.1 Partial Parsing
3.7 Type checking
4 Stream encoding issues
5 library(xpath): Select nodes in an XML DOM
6 Processing Indexed Files
7 External entities
8 library(pwp): Prolog Well-formed Pages
9 Writing markup
9.1 Writing documents
9.2 XML Quote primitives
9.3 XSD lexical forms
9.4 library(c14n2): C14n2 canonical XML documents
10 Unsupported SGML features
11 Acknowledgements

1 Introduction

Markup languages have recently regained popularity for two reasons. One is document exchange, which is largely based on HTML, an instance of SGML, and the other is for data exchange between programs, which is often based on XML, which can be considered a simplified and rationalised version of SGML.

James Clark's SP parser is a flexible SGML and XML parser. Unfortunately it has some drawbacks. It is very big, not very fast, cannot work under event-driven input and is generally hard to program beyond the scope of the well designed generic interface. The generic interface however does not provide access to the DTD, does not allow for flexible handling of input or parsing the DTD independently of a document instance.

The parser described in this document is small (less than 100 kBytes executable on a Pentium), fast (between 2 and 5 times faster than SP), provides access to the DTD, and provides flexible input handling.

The document output is equal to the output produced by xml2pl, an SP interface to SWI-Prolog written by Anjo Anjewierden.

2 Bluffer's Guide

This package allows you to parse SGML, XML and HTML data into a Prolog data structure. The high-level interface defined in library(sgml) provides access at the file-level, while the low-level interface defined in the foreign module works with Prolog streams. Please use the source of sgml.pl as a starting point for dealing with data from other sources than files, such as SWI-Prolog resources, network-sockets, character strings, etc. The first example below loads an HTML file. 

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">

<html>
<head>
<title>Demo</title>
</head>
<body>

<h1 align=center>This is a demo</title>

Paragraphs in HTML need not be closed.

This is called `omitted-tag' handling.
</body>
</html>
?- load_html('test.html', Term, []),
   pretty_print(Term).

[ element(html,
          [],
          [ element(head,
                    [],
                    [ element(title,
                              [],
                              [ 'Demo'
                              ])
                    ]),
            element(body,
                    [],
                    [ '\n',
                      element(h1,
                              [ align = center
                              ],
                              [ 'This is a demo'
                              ]),
                      '\n\n',
                      element(p,
                              [],
                              [ 'Paragraphs in HTML need not be closed.\n'
                              ]),
                      element(p,
                              [],
                              [ 'This is called `omitted-tag\' handling.'
                              ])
                    ])
          ])
].

The document is represented as a list, each element being an atom to represent CDATA or a term element(Name, Attributes, Content). Entities (e.g. &lt;) are expanded and included in the atom representing the element content or attribute value.1Up to SWI-Prolog 5.4.x, Prolog could not represent wide characters and entities that did not fit in the Prolog characters set were emitted as a term number(+Code). With the introduction of wide characters in the 5.5 branch this is no longer needed.

2.1 ‘Goodies' Predicates

These predicates are for basic use of the library, converting entire and self-contained files in SGML, HTML, or XML into a structured term. They are based on load_structure/3.

load_sgml(+Source, -ListOfContent, :Options)
Calls load_structure/3 with the given Options, using the default option dialect(sgml)
load_xml(+Source, -ListOfContent, :Options)
Calls load_structure/3 with the given Options, using the default option dialect(xml)
load_html(+Source, -ListOfContent, :Options)
Calls load_structure/3 with the given Options, using the default options dialect(HTMLDialect), where HTMLDialect is html4 or html5 (default), depending on the Prolog flag html_dialect. Both imply the option shorttag(false). The option dtd(DTD) is passed, where DTD is the HTML DTD as obtained using dtd(html, DTD). See dtd/2.

3 Predicate Reference

3.1 Loading Structured Documents

SGML or XML files are loaded through the common predicate load_structure/3. This is a predicate with many options. For simplicity a number of commonly used shorthands are provided: load_sgml_file/2, load_xml_file/2, and load_html_file/2.

load_structure(+Source, -ListOfContent, +Options)
Parse Source and return the resulting structure in ListOfContent. Source is either a term of the format stream(StreamHandle) or a file-name. Options is a list of options controlling the conversion process.

A proper XML document contains only a single toplevel element whose name matches the document type. Nevertheless, a list is returned for consistency with the representation of element content. The ListOfContent consists of the following types:

Atom
Atoms are used to represent CDATA. Note this is possible in SWI-Prolog, as there is no length-limit on atoms and atom garbage collection is provided.
element(Name, ListAttributes, ListOfContent)
Name is the name of the element. Using SGML, which is case-insensitive, all element names are returned as lowercase atoms.

ListOfAttributes is a list of Name=Value pairs for attributes. Attributes of type CDATA are returned literal. Multi-valued attributes (NAMES, etc.) are returned as a list of atoms. Handling attributes of the types NUMBER and NUMBERS depends on the setting of the number(+NumberMode) attribute through set_sgml_parser/2 or load_structure/3. By default they are returned as atoms, but automatic conversion to Prolog integers is supported. ListOfContent defines the content for the element.

sdata(Text)
If an entity with declared content-type SDATA is encountered, this term is returned holding the data in Text.
ndata(Text)
If an entity with declared content-type NDATA is encountered, this term is returned holding the data in Text.
pi(Text)
If a processing instruction is encountered (<?...?>), Text holds the text of the processing instruction. Please note that the <?xml ...?> instruction is handled internally.

The Options list controls the conversion process. Currently defined options are below. Other options are passed to sgml_parse/2.

dtd(?DTD)
Reference to a DTD object. If specified, the <!DOCTYPE ...> declaration is ignored and the document is parsed and validated against the provided DTD. If provided as a variable, the created DTD is returned. See section 3.5.
dialect(+Dialect)
Specify the parsing dialect. Supported are sgml (default), html4, html5, html (same as html4, xhtml, xhtml5, xml and xmlns. See the option dialect of set_sgml_parser/2 for details.
shorttag(+Bool)
Define whether SHORTTAG abbreviation is accepted. The default is true for SGML mode and false for the XML modes. Without SHORTTAG, a / is accepted with warning as part of an unquoted attribute-value, though /> still closes the element-tag in XML mode. It may be set to false for parsing HTML documents to allow for unquoted URLs containing /.
space(+SpaceMode)
Sets the‘space-handling-mode' for the initial environment. This mode is inherited by the other environments, which can override the inherited value using the XML reserved attribute xml:space. See section 3.2.
number(+NumberMode)
Determines how attributes of type NUMBER and NUMBERS are handled. If token (default) they are passed as an atom. If integer the parser attempts to convert the value to an integer. If successful, the attribute is passed as a Prolog integer. Otherwise it is still passed as an atom. Note that SGML defines a numeric attribute to be a sequence of digits. The - sign is not allowed and 1 is different from 01. For this reason the default is to handle numeric attributes as tokens. If conversion to integer is enabled, negative values are silently accepted.
case_sensitive_attributes(+Boolean)
Treat attribute values as case sensitive. The default is true for XML and false for SGML and HTML dialects.
case_preserving_attributes(+Boolean)
Treat attribute values as case insensitive but do not alter their case. The default is false. Setting this option sets the case_sensitive_attributes to the same value. This option was added to support HTML quasi quotations and most likely has little value in other contexts.
system_entities(+Boolean)
Define whether SYSTEM entities are expanded. The default is false.
defaults(+Bool)
Determines how default and fixed values from the DTD are used. By default, defaults are included in the output if they do not appear in the source. If false, only the attributes occurring in the source are emitted.
entity(+Name, +Value)
Defines (overwrites) an entity definition. At the moment, only CDATA entities can be specified with this construct. Multiple entity options are allowed.
file(+Name)
Sets the name of the file on which errors are reported. Sets the linenumber to 1.
line(+Line)
Sets the starting line-number for reporting errors.
max_memory(+Max)
Sets the maximum buffer size in bytes available for input data and CDATA output. If this limit is reached a resource error is raised. Using max_memory(0) (the default) means no resource limit will be enforced.
cdata(+Representation)
Specify the representation of cdata elements. Supported are atom (default), and string. The choice is not obvious. Strings are allocated on the Prolog stacks and subject to normal stack garbage collection. They are quicker to create and avoid memory fragmentation. But, multiple copies of the same string are stored multiple times, while the text is shared if atoms are used. Strings are also useful for security sensitive information as they are invisible to other threads and cannot be enumerated using, e.g., current_atom/1. Finally, using strings allows for resource usage limits using the global stack limit (see set_prolog_stack/2).
attribute_value(+Representation)
Specify the representation of attribute values. Supported are atom (default), and string. See above for the advantages and disadvantages of using strings.
keep_prefix(+Boolean)
If true, xmlns namespaces with prefixes are returned as ns(Prefix, URI) terms. If false (default), the prefix is ignored and the xmlns namespace is returned as just the URI.

3.2 Handling white-space

SGML2PL has four modes for handling white-space. The initial mode can be switched using the space(SpaceMode) option to load_structure/3 and set_sgml_parser/2. In XML mode, the mode is further controlled by the xml:space attribute, which may be specified both in the DTD and in the document. The defined modes are:

space(sgml)
In SGML, newlines at the start and end of an element are removed.2In addition, newlines at the end of lines containing only markup should be deleted. This is not yet implemented. This is the default mode for the SGML dialect.
space(preserve)
White space is passed literally to the application. This mode leaves most white space handling to the application. This is the default mode for the XML dialect. Note that \r\n is still translated to \n. To preserve whitespace exactly, use space(strict) (see below)
space(strict)
White space is passed strictly to the application. This mode leaves all white space handling to the application. This is useful for producing and verifying XML signatures.
space(default)
In addition to sgml space-mode, all consequtive white-space is reduced to a single space-character. This mode canonicalises all white space.
space(remove)
In addition to default, all leading and trailing white-space is removed from CDATA objects. If, as a result, the CDATA becomes empty, nothing is passed to the application. This mode is especially handy for processing‘data-oriented' documents, such as RDF. It is not suitable for normal text documents. Consider the HTML fragment below. When processed in this mode, the spaces between the three modified words are lost. This mode is not part of any standard; XML 1.0 allows only default and preserve. 
Consider adjacent <b>bold</b> <ul>and</ul> <it>italic</it> words.

3.3 XML documents

The parser can operate in two modes: sgml mode and xml mode, as defined by the dialect(Dialect) option. Regardless of this option, if the first line of the document reads as below, the parser is switched automatically into XML mode. 

<?xml ... ?>

Currently switching to XML mode implies:

3.3.1 XML Namespaces

Using the dialect xmlns, the parser will interpret XML namespaces. In this case, the names of elements are returned as a term of the format

URL:LocalName

If an identifier has no namespace and there is no default namespace it is returned as a simple atom. If an identifier has a namespace but this namespace is undeclared, the namespace name rather than the related URL is returned.

Attributes declaring namespaces (xmlns:<ns>=<url>) are reported as if xmlns were not a defined resource.

In many cases, getting attribute-names as url:name is not desirable. Such terms are hard to unify and sometimes multiple URLs may be mapped to the same identifier. This may happen due to poor version management, poor standardisation or because the the application doesn't care too much about versions. This package defines two call-backs that can be set using set_sgml_parser/2 to deal with this problem.

The call-back xmlns is called as XML namespaces are noticed. It can be used to extend a canonical mapping for later use by the urlns call-back. The following illustrates this behaviour. Any namespace containing rdf-syntax in its URL or that is used as rdf namespace is canonicalised to rdf. This implies that any attribute and element name from the RDF namespace appears as rdf:<name> 

:- dynamic
        xmlns/3.

on_xmlns(rdf, URL, _Parser) :- !,
        asserta(xmlns(URL, rdf, _)).
on_xmlns(_, URL, _Parser) :-
        sub_atom(URL, _, _, _, 'rdf-syntax'), !,
        asserta(xmlns(URL, rdf, _)).

load_rdf_xml(File, Term) :-
        load_structure(File, Term,
                       [ dialect(xmlns),
                         call(xmlns, on_xmlns),
                         call(urlns, xmlns)
                       ]).

The library provides iri_xml_namespace/3 to break down an IRI into its namespace and localname:

[det]iri_xml_namespace(+IRI, -Namespace, -Localname)
Split an IRI (Unicode URI) into its Namespace (an IRI) and Localname (a Unicode XML name, see xml_name/2). The Localname is defined as the longest last part of the IRI that satisfies the syntax of an XML name. With IRI schemas that are designed to work with XML namespaces, this will typically break the IRI on the last # or /. Note however that this can produce unexpected results. E.g., in the example below, one might expect the namespace to be http://example.com/images\#, but an XML name cannot start with a digit. 
?- iri_xml_namespace('http://example.com/images#12345', NS, L).
NS = 'http://example.com/images#12345',
L = ''.

As we see from the example above, the Localname can be the empty atom. Similarly, Namespace can be the empty atom if IRI is an XML name. Applications will often have to check for either or both these conditions. We decided against failing in these conditions because the application typically wants to know which of the two conditions (empty namespace or empty localname) holds. This predicate is often used for generating RDF/XML from an RDF graph.

[det]iri_xml_namespace(+IRI, -Namespace)
Same as iri_xml_namespace/3, but avoids creating an atom for the Localname.

3.4 DTD-Handling

The DTD (Document Type Definition) is a separate entity in sgml2pl, that can be created, freed, defined and inspected. Like the parser itself, it is filled by opening it as a Prolog output stream and sending data to it. This section summarises the predicates for handling the DTD.

new_dtd(+DocType, -DTD)
Creates an empty DTD for the named DocType. The returned DTD-reference is an opaque term that can be used in the other predicates of this package.
free_dtd(+DTD)
Deallocate all resources associated to the DTD. Further use of DTD is invalid.
load_dtd(+DTD, +File)
Define the DTD by loading the SGML-DTD file File. Same as load_dtd/3 with empty option list.
load_dtd(+DTD, +File, +Options)
Define the DTD by loading File. Defined options are the dialect option from open_dtd/3 and the encoding option from open/4. Notably the dialect option must match the dialect used for subsequent parsing using this DTD.
open_dtd(+DTD, +Options, -OutStream)
Open a DTD as an output stream. See load_dtd/2 for an example. Defined options are:
dialect(Dialect)
Define the DTD dialect. Default is sgml. Using xml or xmlns processes the DTD case-sensitive.
dtd(+DocType, -DTD)
Find the DTD representing the indicated doctype. This predicate uses a cache of DTD objects. If a doctype has no associated dtd, it searches for a file using the file search path dtd using the call: 
...,
absolute_file_name(dtd(Type),
                   [ extensions([dtd]),
                     access(read)
                   ], DtdFile),
...

Note that DTD objects may be modified while processing errornous documents. For example, loading an SGML document starting with <?xml ...?> switches the DTD to XML mode and encountering unknown elements adds these elements to the DTD object. Re-using a DTD object to parse multiple documents should be restricted to situations where the documents processed are known to be error-free.

The DTD html is handled separately. The Prolog flag html_dialect specifies the default html dialect, which is either html4 or html5 (default).3Note that HTML5 has no DTD. The loaded DTD is an informal DTD that includes most of the HTML5 extensions (http://www.cs.tut.fi/~jkorpela/html5-dtd.html). In addition, the parser sets the dialect flag of the DTD object. This is used by the parser to accept HTML extensions. Next, the corresponding DTD is loaded.

dtd_property(+DTD, ?Property)
This predicate is used to examine the content of a DTD. Property is one of:
doctype(DocType)
An atom representing the document-type defined by this DTD.
elements(ListOfElements)
A list of atoms representing the names of the elements in this DTD.
element(Name, Omit, Content)
The DTD contains an element with the given name. Omit is a term of the format omit(OmitOpen, OmitClose), where both arguments are booleans (true or false representing whether the open- or close-tag may be omitted. Content is the content-model of the element represented as a Prolog term. This term takes the following form:
empty
The element has no content.
cdata
The element contains non-parsed character data. All data up to the matching end-tag is included in the data (declared content).
rcdata
As cdata, but entity-references are expanded.
any
The element may contain any number of any element from the DTD in any order.
#pcdata
The element contains parsed character data .
element(A)
n element with this name.
*(SubModel)
0 or more appearances.
?(SubModel)
0 or one appearance.
+(SubModel)
1 or more appearances.
,(SubModel1, SubModel2)
SubModel1 followed by SubModel2.
&(SubModel1, SubModel2)
SubModel1 and SubModel2 in any order.
|(SubModel1, SubModel2)
SubModel1 or SubModel2.
attributes(Element, ListOfAttributes)
ListOfAttributes is a list of atoms representing the attributes of the element Element.
attribute(Element, Attribute, Type, Default)
Query an element. Type is one of cdata, entity, id, idref, name, nmtoken, notation, number or nutoken. For DTD types that allow for a list, the notation list(Type) is used. Finally, the DTD construct (a|b|...) is mapped to the term nameof(ListOfValues).

Default describes the sgml default. It is one required, current, conref or implied. If a real default is present, it is one of default(Value) or fixed(Value).

entities(ListOfEntities)
ListOfEntities is a list of atoms representing the names of the defined entities.
entity(Name, Value)
Name is the name of an entity with given value. Value is one of
Atom
If the value is atomic, it represents the literal value of the entity.
system(Url)
Url is the URL of the system external entity.
public(Id, Url)
For external public entities, Id is the identifier. If an URL is provided this is returned in Url. Otherwise this argument is unbound.
notations(ListOfNotations)
Returns a list holding the names of all NOTATION declarations.
notation(Name, Decl)
Unify Decl with a list if system(+File) and/or public(+PublicId).

3.4.1 The DOCTYPE declaration

As this parser allows for processing partial documents and process the DTD separately, the DOCTYPE declaration plays a special role.

If a document has no DOCTYPE declaraction, the parser returns a list holding all elements and CDATA found. If the document has a DOCTYPE declaraction, the parser will open the element defined in the DOCTYPE as soon as the first real data is encountered.

3.5 Extracting a DTD

Some documents have no DTD. One of the neat facilities of this library is that it builds a DTD while parsing a document with an implicit DTD. The resulting DTD contains all elements encountered in the document. For each element the content model is a disjunction of elements and possibly #PCDATA that can be repeated. Thus, if we found element y and CDATA in element x, the model is: 

<!ELEMENT x - - (y|#PCDATA)*>

Any encountered attribute is added to the attribute list with the type CDATA and default #IMPLIED.

The example below extracts the elements used in an unknown XML document. 

elements_in_xml_document(File, Elements) :-
        load_structure(File, _,
                       [ dialect(xml),
                         dtd(DTD)
                       ]),
        dtd_property(DTD, elements(Elements)),
        free_dtd(DTD).

3.6 Parsing Primitives

new_sgml_parser(-Parser, +Options)
Creates a new parser. A parser can be used one or multiple times for parsing documents or parts thereof. It may be bound to a DTD or the DTD may be left implicit, in which case it is created from the document prologue or parsing is performed without a DTD. Options:
dtd(?DTD)
If specified with an initialised DTD, this DTD is used for parsing the document, regardless of the document prologue. If specified using as a variable, a reference to the created DTD is returned. This DTD may be created from the document prologue or build implicitely from the document's content.
free_sgml_parser(+Parser)
Destroy all resources related to the parser. This does not destroy the DTD if the parser was created using the dtd(DTD) option.
set_sgml_parser(+Parser, +Option)
Sets attributes to the parser. Currently defined attributes:
file(File)
Sets the file for reporting errors and warnings. Sets the line to 1.
line(Line)
Sets the current line. Useful if the stream is not at the start of the (file) object for generating proper line-numbers.
linepos(LinePos)
Sets notion of the current column in the source line.
charpos(Offset)
Sets the current character location. See also the file(File) option.
position(Position)
Set source location from a stream position term as obtained using stream_property(Stream, position(Position)).
dialect(Dialect)
Set the markup dialect. Known dialects:
sgml
The default dialect is to process as SGML. This implies markup is case-insensitive and standard SGML abbreviation is allowed (abreviated attributes and omitted tags).
html
html4
This is the same as sgml, but implies shorttag(false) and accepts XML empty element declarations (e.g., <img src="..."/>).
html5
In addition to html, accept attributes named data- without warning. This value initialises the charset to UTF-8.
xhtml
xhtml5
These document types are processed as xml. Dialect xhtml5 accepts attributes named data- without warning.
xml
This dialect is selected automatically if the processing instruction <?xml ...> is encountered. See section 3.3 for details.
xmlns
Process file as XML file with namespace support. See section 3.3.1 for details. See also the qualify_attributes option below.
xmlns(+URI)
Set the default namespace of the outer environment. This option is provided to process partial XML content with proper namespace resolution.
xmlns(+NS, +URI)
Specify a namespace for the outer environment. This option is provided to process partial XML content with proper namespace resolution.
qualify_attributes(Boolean)
How to handle unqualified attribute (i.e. without an explicit namespace) in XML namespace (xmlns) mode. Default and standard compliant is not to qualify such elements. If true, such attributes are qualified with the namespace of the element they appear in. This option is for backward compatibility as this is the behaviour of older versions. In addition, the namespace document suggests unqualified attributes are often interpreted in the namespace of their element.
space(SpaceMode)
Define the initial handling of white-space in PCDATA. This attribute is described in section 3.2.
number(NumberMode)
If token (default), attributes of type number are passed as a Prolog atom. If integer, such attributes are translated into Prolog integers. If the conversion fails (e.g. due to overflow) a warning is issued and the value is passed as an atom.
encoding(Encoding)
Set the initial encoding. The default initial encoding for XML documents is UTF-8 and for SGML documents ISO-8859-1. XML documents may change the encoding using the encoding= attribute in the header. Explicit use of this option is only required to parse non-conforming documents. Currently accepted values are iso-8859-1 and utf-8.
doctype(Element)
Defines the toplevel element expected. If a <!DOCTYPE declaration has been parsed, the default is the defined doctype. The parser can be instructed to accept the first element encountered as the toplevel using doctype(_). This feature is especially useful when parsing part of a document (see the parse option to sgml_parse/2.
get_sgml_parser(+Parser, -Option)
Retrieve infomation on the current status of the parser. Notably useful if the parser is used in the call-back mode. Currently defined options:
file(-File)
Current file-name. Note that this may be different from the provided file if an external entity is being loaded.
line(-Line)
Line-offset from where the parser started its processing in the file-object.
charpos(-CharPos)
Offset from where the parser started its processing in the file-object. See section 6.
charpos(-Start, -End)
Character offsets of the start and end of the source processed causing the current call-back. Used in PceEmacs to for colouring text in SGML and XML modes.
source(-Stream)
Prolog stream being processed. May be used in the on_begin, etc. callbacks from sgml_parse/2.
dialect(-Dialect)
Return the current dialect used by the parser (sgml, html, html5, xhtml, xhtml5, xml or xmlns).
event_class(-Class)
The event class can be requested in call-back events. It denotes the cause of the event, providing useful information for syntax highlighting. Defined values are:
explicit
The code generating this event is explicitely present in the document.
omitted
The current event is caused by the insertion of an omitted tag. This may be a normal event in SGML mode or an error in XML mode.
shorttag
The current event (begin or end) is caused by an element written down using the shorttag notation (<tag/value/>.
shortref
The current event is caused by the expansion of a shortref. This allows for highlighting shortref strings in the source-text.
doctype(-Element)
Return the defined document-type (= toplevel element). See also set_sgml_parser/2.
dtd(-DTD)
Return the currently used DTD. See dtd_property/2 for obtaining information on the DTD such as element and attribute properties.
context(-StackOfElements)
Returns the stack of currently open elements as a list. The head of this list is the current element. This can be used to determine the context of, for example, CDATA events in call-back mode. The elements are passed as atoms. Currently no access to the attributes is provided.
allowed(-Elements)
Determines which elements may be inserted at the current location. This information is returned as a list of element-names. If character data is allowed in the current location, #pcdata is part of Elements. If no element is open, the doctype is returned.

This option is intended to support syntax-sensitive editors. Such an editor should load the DTD, find an appropriate starting point and then feed all data between the starting point and the caret into the parser. Next it can use this option to determine the elements allowed at this point. Below is a code fragment illustrating this use given a parser with loaded DTD, an input stream and a start-location. 

        ...,
        seek(In, Start, bof, _),
        set_sgml_parser(Parser, charpos(Start)),
        set_sgml_parser(Parser, doctype(_)),
        Len is Caret - Start,
        sgml_parse(Parser,
                   [ source(In),
                     content_length(Len),
                     parse(input)       % do not complete document
                   ]),
        get_sgml_parser(Parser, allowed(Allowed)),
        ...

sgml_parse(+Parser, +Options)
Parse an XML file. The parser can operate in two input and two output modes. Output is either a structured term as described with load_structure/2 or call-backs on predefined events. The first is especially suitable for manipulating not-too-large documents, while the latter provides a primitive means for handling very large documents.

Input is a stream. A full description of the option-list is below.

document(-Term)
A variable that will be unified with a list describing the content of the document (see load_structure/2).
source(+Stream)
An input stream that is read. This option must be given.
content_length(+Characters)
Stop parsing after Characters. This option is useful to parse input embedded in envelopes, such as the HTTP protocol.
cdata(+Representation)
Specify the representation of cdata elements. Supported are atom (default), and string. See load_structure/3 for details.
parse(+Unit)
Defines how much of the input is parsed. This option is used to parse only parts of a file.
file
Default. Parse everything upto the end of the input.
element
The parser stops after reading the first element. Using source(Stream), this implies reading is stopped as soon as the element is complete, and another call may be issued on the same stream to read the next element.
content
The value content is like element but assumes the element has already been opened. It may be used in a call-back from call(on_begin, Pred) to parse individual elements after validating their headers.
declaration
This may be used to stop the parser after reading the first declaration. This is especially useful to parse only the doctype declaration.
input
This option is intended to be used in conjunction with the allowed(Elements) option of get_sgml_parser/2. It disables the parser's default to complete the parse-tree by closing all open elements.
max_errors(+MaxErrors)
Set the maximum number of errors. If this number is exceeded further writes to the stream will yield an I/O error exception. Printing of errors is suppressed after reaching this value. The default is 50. Using max_errors(-1) makes the parser continue, no matter how many errors it encounters.
error(limit_exceeded(max_errors, Max), _)
syntax_errors(+ErrorMode)
Defines how syntax errors are handled.
quiet
Suppress all messages.
print
Default. Pass messages to print_message/2.
style
Print dubious input such as attempts for redefinitions in the DTD using print_message/2 with severity informational.
xml_no_ns(+Mode)
Error handling if an XML namespace is not defined. Default generates an error. If quiet, the error is suppressed. Can be used together with call(urlns, Closure) to provide external expansion of namespaces. See also section 3.3.1.
call(+Event, :PredicateName)
Issue call-backs on the specified events. PredicateName is the name of the predicate to call on this event, possibly prefixed with a module identifier. If the handler throws an exception, parsing is stopped and sgml_parse/2 re-throws the exception. The defined events are:
begin
An open-tag has been parsed. The named handler is called with three arguments: Handler(+Tag, +Attributes, +Parser).
end
A close-tag has been parsed. The named handler is called with two arguments: Handler(+Tag, +Parser).
cdata
CDATA has been parsed. The named handler is called with two arguments: Handler(+CDATA, +Parser), where CDATA is an atom representing the data.
pi
A processing instruction has been parsed. The named handler is called with two arguments: Handler(+Text, +Parser), where Text is the text of the processing instruction.
decl
A declaration (<!...>) has been read. The named handler is called with two arguments: Handler(+Text, +Parser), where Text is the text of the declaration with comments removed.

This option is expecially useful for highlighting declarations and comments in editor support, where the location of the declaration is extracted using get_sgml_parser/2.

error
An error has been encountered. the named handler is called with three arguments: Handler(+Severity, +Message, +Parser), where Severity is one of warning or error and Message is an atom representing the diagnostic message. The location of the error can be determined using get_sgml_parser/2

If this option is present, errors and warnings are not reported using print_message/3

xmlns
When parsing an in xmlns mode, a new namespace declaraction is pushed on the environment. The named handler is called with three arguments: Handler(+NameSpace, +URL, +Parser). See section 3.3.1 for details.
urlns
When parsing an in xmlns mode, this predicate can be used to map a url into either a canonical URL for this namespace or another internal identifier. See section 3.3.1 for details.

3.6.1 Partial Parsing

In some cases, part of a document needs to be parsed. One option is to use load_structure/2 or one of its variations and extract the desired elements from the returned structure. This is a clean solution, especially on small and medium-sized documents. It however is unsuitable for parsing really big documents. Such documents can only be handled with the call-back output interface realised by the call(Event, Action) option of sgml_parse/2. Event-driven processing is not very natural in Prolog.

The SGML2PL library allows for a mixed approach. Consider the case where we want to process all descriptions from RDF elements in a document. The code below calls process_rdf_description(Element) on each element that is directly inside an RDF element. 

:- dynamic
        in_rdf/0.

load_rdf(File) :-
        retractall(in_rdf),
        open(File, read, In),
        new_sgml_parser(Parser, []),
        set_sgml_parser(Parser, file(File)),
        set_sgml_parser(Parser, dialect(xml)),
        sgml_parse(Parser,
                   [ source(In),
                     call(begin, on_begin),
                     call(end, on_end)
                   ]),
        close(In).

on_end('RDF', _) :-
        retractall(in_rdf).

on_begin('RDF', _, _) :-
        assert(in_rdf).
on_begin(Tag, Attr, Parser) :-
        in_rdf, !,
        sgml_parse(Parser,
                   [ document(Content),
                     parse(content)
                   ]),
        process_rdf_description(element(Tag, Attr, Content)).

3.7 Type checking

xml_is_dom(@Term)
True if Term is an SGML/XML term as produced by one of the above predicates and acceptable by xml_write/3 and friends.

4 Stream encoding issues

The parser can deal with ISO Latin-1 and UTF-8 encoded files, doing decoding based on the encoding argument provided to set_sgml_parser/2 or, for XML, based on the encoding attribute of the XML header. The parser reads from SWI-Prolog streams, which also provide encoding handling. Therefore, there are two modes for parsing. If the SWI-Prolog stream has encoding octet (which is the default for binary streams), the decoder of the SGML parser will be used and positions reported by the parser are octet offsets in the stream. In other cases, the Prolog stream decoder is used and offsets are character code counts.

5 library(xpath): Select nodes in an XML DOM

See also
http://www.w3.org/TR/xpath

The library xpath.pl provides predicates to select nodes from an XML DOM tree as produced by library(sgml) based on descriptions inspired by the XPath language.

The predicate xpath/3 selects a sub-structure of the DOM non-deterministically based on an XPath-like specification. Not all selectors of XPath are implemented, but the ability to mix xpath/3 calls with arbitrary Prolog code provides a powerful tool for extracting information from XML parse-trees.

[semidet]xpath_chk(+DOM, +Spec, ?Content)
Semi-deterministic version of xpath/3.
[nondet]xpath(+DOM, +Spec, ?Content)
Match an element in a DOM structure. The syntax is inspired by XPath, using () rather than [] to select inside an element. First we can construct paths using / and //:
//Term
Select any node in the DOM matching term.
/Term
Match the root against Term.
Term
Select the immediate children of the root matching Term.

The Terms above are of type callable. The functor specifies the element name. The element name’*' refers to any element. The name self refers to the top-element itself and is often used for processing matches of an earlier xpath/3 query. A term NS:Term refers to an XML name in the namespace NS. Optional arguments specify additional constraints and functions. The arguments are processed from left to right. Defined conditional argument values are:

index(?Index)
True if the element is the Index-th child of its parent, where 1 denotes the first child. Index can be one of:
Var
Var is unified with the index of the matched element.
last
True for the last element.
last - IntExpr
True for the last-minus-nth element. For example, last-1 is the element directly preceding the last one.
IntExpr
True for the element whose index equals IntExpr.
Integer
The N-th element with the given name, with 1 denoting the first element. Same as index(Integer).
last
The last element with the given name. Same as index(last).
last - IntExpr
The IntExpr-th element before the last. Same as index(last-IntExpr).

Defined function argument values are:

self
Evaluate to the entire element
content
Evaluate to the content of the element (a list)
text
Evaluates to all text from the sub-tree as an atom
text(As)
Evaluates to all text from the sub-tree according to As, which is either atom or string.
normalize_space
As text, but uses normalize_space/2 to normalise white-space in the output
number
Extract an integer or float from the value. Ignores leading and trailing white-space
@Attribute
Evaluates to the value of the given attribute. Attribute can be a compound term. In this case the functor name denotes the element and arguments perform transformations on the attribute value. Defined transformations are:
number
Translate the value into a number using xsd_number_string/2 from library(sgml).
integer
As number, but subsequently transform the value into an integer using the round/1 function.
float
As number, but subsequently transform the value into a float using the float/1 function.
string
Translate the value into a Prolog string.
lower
Translate the value to lower case, preserving the type.
upper
Translate the value to upper case, preserving the type.

In addition, the argument-list can be conditions:

Left = Right
Succeeds if the left-hand unifies with the right-hand. If the left-hand side is a function, this is evaluated. The right-hand side is never evaluated, and thus the condition content = content defines that the content of the element is the atom content. The functions lower_case and upper_case can be applied to Right (see example below).
contains(Haystack, Needle)
Succeeds if Needle is a sub-string of Haystack.
XPath
Succeeds if XPath matches in the currently selected sub-DOM. For example, the following expression finds an h3 element inside a div element, where the div element itself contains an h2 child with a strong child. 
//div(h2/strong)/h3

This is equivalent to the conjunction of XPath goals below. 

   ...,
   xpath(DOM, //(div), Div),
   xpath(Div, h2/strong, _),
   xpath(Div, h3, Result)

Examples:

Match each table-row in DOM: 

xpath(DOM, //tr, TR)

Match the last cell of each tablerow in DOM. This example illustrates that a result can be the input of subsequent xpath/3 queries. Using multiple queries on the intermediate TR term guarantee that all results come from the same table-row: 

xpath(DOM, //tr, TR),
xpath(TR,  /td(last), TD)

Match each href attribute in an <a> element 

xpath(DOM, //a(@href), HREF)

Suppose we have a table containing rows where each first column is the name of a product with a link to details and the second is the price (a number). The following predicate matches the name, URL and price: 

product(DOM, Name, URL, Price) :-
    xpath(DOM, //tr, TR),
    xpath(TR, td(1), C1),
    xpath(C1, /self(normalize_space), Name),
    xpath(C1, a(@href), URL),
    xpath(TR, td(2, number), Price).

Suppose we want to select books with genre="thriller" from a tree containing elements <book genre=...> 

thriller(DOM, Book) :-
    xpath(DOM, //book(@genre=thiller), Book).

Match the elements <table align="center"> and <table align="CENTER">: 

    //table(@align(lower) = center)

Get the width and height of a div element as a number, and the div node itself: 

    xpath(DOM, //div(@width(number)=W, @height(number)=H), Div)

Note that div is an infix operator, so parentheses must be used in cases like the following: 

    xpath(DOM, //(div), Div)

6 Processing Indexed Files

In some cases applications wish to process small portions of large SGML, XML or RDF files. For example, the OpenDirectory project by Netscape has produced a 90MB RDF file representing the main index. The parser described here can process this document as a unit, but loading takes 85 seconds on a Pentium-II 450 and the resulting term requires about 70MB global stack. One option is to process the entire document and output it as a Prolog fact-base of RDF triplets, but in many cases this is undesirable. Another example is a large SGML file containing online documentation. The application normally wishes to provide only small portions at a time to the user. Loading the entire document into memory is then undesirable.

Using the parse(element) option, we open a file, seek (using seek/4) to the position of the element and read the desired element.

The index can be built using the call-back interface of sgml_parse/2. For example, the following code makes an index of the structure.rdf file of the OpenDirectory project: 

:- dynamic
        location/3.                     % Id, File, Offset

rdf_index(File) :-
        retractall(location(_,_)),
        open(File, read, In, [type(binary)]),
        new_sgml_parser(Parser, []),
        set_sgml_parser(Parser, file(File)),
        set_sgml_parser(Parser, dialect(xml)),
        sgml_parse(Parser,
                   [ source(In),
                     call(begin, index_on_begin)
                   ]),
        close(In).

index_on_begin(_Element, Attributes, Parser) :-
        memberchk('r:id'=Id, Attributes),
        get_sgml_parser(Parser, charpos(Offset)),
        get_sgml_parser(Parser, file(File)),
        assert(location(Id, File, Offset)).

The following code extracts the RDF element with required id: 

rdf_element(Id, Term) :-
        location(Id, File, Offset),
        load_structure(File, Term,
                       [ dialect(xml),
                         offset(Offset),
                         parse(element)
                       ]).

7 External entities

While processing an SGML document the document may refer to external data. This occurs in three places: external parameter entities, normal external entities and the DOCTYPE declaration. The current version of this tool deals rather primitively with external data. External entities can only be loaded from a file and the mapping between the entity names and the file is done using a catalog file in a format compatible with that used by James Clark's SP Parser, based on the SGML Open (now OASIS) specification.

Catalog files can be specified using two primitives: the predicate sgml_register_catalog_file/2 or the environment variable SGML_CATALOG_FILES (compatible with the SP package).

sgml_register_catalog_file(+File, +Location)
Register the indicated File as a catalog file. Location is either start or end and defines whether the catalog is considered first or last. This predicate has no effect if File is already part of the catalog.

If no files are registered using this predicate, the first query on the catalog examines SGML_CATALOG_FILES and fills the catalog with all files in this path.

Two types of lines are used by this package.

DOCTYPE doctype file
PUBLIC "Id" file

The specified file path is taken relative to the location of the catolog file. For the DOCTYPE declaraction, library(sgml) first makes an attempt to resolve the SYSTEM or PUBLIC identifier. If this fails it tries to resolve the doctype using the provided catalog files.

Strictly speaking, library(sgml) breaks the rules for XML, where system identifiers must be Universal Resource Indicators, not local file names. Simple uses of relative URIs will work correctly under UNIX and Windows.

In the future we will design a call-back mechanism for locating and processing external entities, so Prolog-based file-location and Prolog resources can be used to store external entities.

8 library(pwp): Prolog Well-formed Pages

author
Richard O'Keefe
To be done
Support compilation of PWP input files

PWP is an approach to server-side scripting using Prolog which is based on a simple key principle:

Especially when generating XML rather than HTML, this is such an obvious thing to do. We have many kinds of XML checking tools.

Having decided that the input should be well formed, that means NO NEW SYNTAX

None of the weird and horrible <% ... %> or whatever not-quite-XML stuff you see in other template systems, making checking so very hard (and therefore, making errors so distressingly common).

That in turns means that PWP "markup" must be based on special elements or special attributes. The fact that an XML parser must allow undeclared attributes on any element even when validating, but must not allow undeclared elements, suggests doing this through attributes. In particular, one should be able to take an existing DTD, such as an XHTML DTD, and just use that without modification. So the design reduces to

This description uses the following name space: 

xmlns:pwp='http://www.cs.otago.ac.nz/staffpriv/ok/pwp.pl'

The attributes are

Here's what they mean. Each element is expanded in the context of a set of variable bindings. After expansion, if the tag is not mapped to’-', all attributes in the pwp: namespace are removed and the children elements are recursively expanded.

Examples:

  1. A "Hello World" like example 
    <html
  xmlns:pwp="http://www.cs.otago.ac.nz/staffpriv/ok/pwp.pl"
  pwp:ask = "ensure_loaded(msg), once(msg(Greeting))">
  <head>
    <title pwp:use="Greeting"/>
  </head>
  <body>
    <p><span pwp:use="Greeting" pwp:tag='-'/></p>
  </body>
</html>

    where msg.pl contains 

    msg('Hello, World!').

    This example illustrates an important point. Prolog Well-Formed Pages provide NO way to physically incorporate Prolog clauses into a page template. Prolog clauses must be put in separate files which can be checked by a Prolog syntax checker, compiler, cross-referencer, &c WITHOUT the Prolog tool in question needing to know anything whatsoever about PWP. You load the files using pwp:ask on the root element.

  2. Binding some variables and using them 
    <html
  xmlns:pwp="http://www.cs.otago.ac.nz/staffpriv/ok/pwp.pl">
  <head><title>Example 2</title></head>
  <body pwp:ask="Hello = 'Hello world', A = 20, B = 22">
    <h1 pwp:use="Hello"/>
    <p>The answer is <span pwp:use="C" pwp:ask="C is A+B"/>.</p>
  </body>
</html>

  3. Making a table We are given a Prolog database staff.pl defining staff(NickName, FullName, Office, Phone, E_Mail_Address). status(NickName, full_time | part_time). We want to make a phone list of full time staff. 
    <html
  xmlns:pwp="http://www.cs.otago.ac.nz/staffpriv/ok/pwp.pl"
  pwp:ask='ensure_loaded(staff)'>
  <head>
    <title>Phone list for Full-Time staff.</title>
  </head>
  <body>
    <h1>Phone list for Full-Time staff.</h1>
    <table
      pwp:ask = "setof(FullName-Phone,
                       N^O^E^(
                         status(N, full_time),
                         staff(N, FullName, O, Phone, E)
                       ),
                       Staff_List)">
      <tr><th>Name</th><th>Phone</th></tr>
      <tr pwp:ask="member(FullName-Phone, Staff_List)">
        <td pwp:use="FullName"/>
        <td pwp:use="Phone"/>
      </tr>
    </table>
  </body>
</html>

  4. Substituting into an attribute Same data base as before, but now we want to make a mailing list page. 
    <html
  xmlns:pwp="http://www.cs.otago.ac.nz/staffpriv/ok/pwp.pl"
  pwp:ask='ensure_loaded(staff)'>
  <head>
    <title>Phone list for Full-Time staff.</title>
  </head>
  <body>
    <h1>Phone list for Full-Time staff.</h1>
    <table
      pwp:ask = "setof(FullName-E_Mail,
                       N^O^P^staff(N, FullName, O, P, E_Mail),
                       Staff_List)">
      <tr><th>Name</th><th>Address</th></tr>
      <tr pwp:ask="member(FullName-E_Mail, Staff_List)">
        <td pwp:use="FullName"/>
        <td><a pwp:use="E_Mail"
               pwp:att='$' href="mailto:$(E_Mail)$"/></td>
      </tr>
    </table>
  </body>
</html>

  5. If-then-else effect A page that displays the value of the’SHELL' environment variable if it has one, otherwise displays’There is no default shell.' 
    <html
  xmlns:pwp="http://www.cs.otago.ac.nz/staffpriv/ok/pwp.pl">
  <head><title>$SHELL</title></head>
  <body>
    <p pwp:ask="getenv('SHELL', Shell)"
    >The default shell is <span pwp:tag="-" pwp:use="Shell"/>.</p>
    <p pwp:ask="\+getenv('SHELL',_)">There is no default shell.</p>
  </body>
</html>

    There is one other criterion for a good server-side template language:

    It should be possible to compile templates so as to eliminate most if not all interpretation overhead.

    This particular notation satisfies that criterion with the limitation that the conversion of a term to character data requires run-time traversal of terms (because the terms are not known until run time).

[det]pwp_files(:In:atom, +Out:atom)
loads an Xml document from the file named In, transforms it using the PWP attributes, and writes the transformed version to the new file named Out.
[det]pwp_stream(:Input:input_stream, +Output:output_stream, +Context:list)
Loads an Xml document from the given Input stream, transforms it using the PWP attributes, and writes the transformed version to the given Output stream. Context provides initial contextual variables and is a list of Name=Value.
pwp_xml(:In:list(xml), -Out:list(xml), +Context)
maps down a list of XML items, acting specially on elements and copying everything else unchanged, including white space. The Context is a list of’VariableName'=CurrentValue bindings.

9 Writing markup

9.1 Writing documents

The library library(sgml_write) provides the inverse of the parser, converting the parser's output back into a file. This process is fairly simple for XML, but due to the power of the SGML DTD it is much harder to achieve a reasonable generic result for SGML.

These predicates can write the output in two encoding schemas depending on the encoding of the Stream. In UTF-8 mode, all characters are encoded using UTF-8 sequences. In ISO Latin-1 mode, characters outside the ISO Latin-1 range are represented using a named character entity if provided by the DTD or a numeric character entity.

xml_write(+Stream, +Term, +Options)
Write the XML header with encoding information and the content of the document as represented by Term to Stream. This predicate deals with XML with or without namespaces. If namespace identifiers are not provided they are generated. This predicate defines the following Options
dtd(DTD)
Specify the DTD. In SGML documents the DTD is required to distinguish between elements that are declared empty in the DTD and elements that just happen to have no content. Further optimisation (shortref, omitted tags, etc.) could be considered in the future. The DTD is also used to find the declared named character entities.
doctype(Doctype)
Document type to include in the header. When omitted it is taken from the outer element.
header(Bool)
If Bool is false, the XML header is suppressed. Useful for embedding in other XML streams.
layout(Bool)
Do/do not emit layout characters to make the output readable, Default is to emit layout. With layout enabled, elements only containing other elements are written using increasing indentation. This introduces (depending on the mode and defined whitespace handling) CDATA sequences with only layout between elements when read back in. If false, no layout characters are added. As this mode does not need to analyse the document it is faster and guarantees correct output when read back. Unfortunately the output is hardly human readable and causes problems with many editors.
indent(Integer)
Set the initial element indentation. It more than zero, the indent is written before the document.
nsmap(Map)
Set the initial namespace map. Map is a list of Name = URI. This option, together with header and ident is added to use xml_write/3 to generate XML that is embedded in a larger XML document.
net(Bool)
Use/do not use Null End Tags. For XML, this applies only to empty elements, so you get <foo/> (default, net(true)) or <foo></foo> (net(false)). For SGML, this applies to empty elements, so you get <foo> (if foo is declared to be EMPTY in the DTD), <foo></foo> (default, net(false)) or <foo// (net(true)). In SGML code, short character content not containing / can be emitted as <b>xxx</b> (default, net(false) or <b/xxx/ (net(true))
sgml_write(+Stream, +Term, +Options)
Write the SGML DOCTYPE header and the content of the document as represented by Term to Stream. The Options are described with xml_write/3.
html_write(+Stream, +Term, +Options)
Same as sgml_write/3, but passes the HTML DTD as obtained from dtd/2. The Options are described with xml_write/3.

9.2 XML Quote primitives

In most cases, the preferred way to create an XML document is to create a Prolog tree of element(Name, Attributes, Content) terms and call xml_write/3 to write this to a stream. There are some exceptions where one might not want to pay the price of the intermediate representation. For these cases, this library contains building blocks for emitting markup data. The quote funtions return a version of the input text into one that contains entities for characters that need to be escaped. These are the XML meta characters and the characters that cannot be expressed by the document encoding. Therefore these predicates accept an encoding argument. Accepted values are ascii, iso_latin_1, utf8 and unicode. Versions with two arguments are provided for backward compatibility, making the safe ascii encoding assumption.

xml_quote_attribute(+In, -Quoted, +Encoding)
Map the characters that may not appear in XML attributes to entities. Currently these are <>&".4Older versions also mapped ’ to &apos;. Characters that cannot represented in Encoding are mapped to XML character entities.
xml_quote_attribute(+In, -Quoted)
Backward compatibility version for xml_quote_attribute/3. Assumes ascii encoding.
xml_quote_cdata(+In, -Quoted, +Encoding)
Very similar to xml_quote_attribute/3, but does not quote the single- and double-quotes.
xml_quote_cdata(+In, -Quoted)
Backward compatibility version for xml_quote_cdata/3. Assumes ascii encoding.
xml_name(+In, +Encoding)
Succeed if In is an atom or string that satisfies the rules for a valid XML element or attribute name. As with the other predicates in this group, if Encoding cannot represent one of the characters, this function fails. Character classification is based on http://www.w3.org/TR/2006/REC-xml-20060816.
xml_name(+In)
Backward compatibility version for xml_name/2. Assumes ascii encoding.

9.3 XSD lexical forms

The predicates in this section translate between values and their lexical forms for XML-Schema data types. They are implementated in C to achieve the best possible performance.

[det]xsd_number_string(?Number, ?String)
This predicate is similar to number_string/2, but accepts floating point numbers according to the XML syntax rather than the Prolog syntax. In particular, XML does not require a‘0' (zero) before and after the decimal dot and accepts the constants NaN and INF. If a Prolog float is converted into a string it returns the XML canonical form. This form always has one digit before the decimal dot, at least one digit after it and an exponential component using the capital E. This predicate behaves as number_string/2 for integers.

Throws a syntax_error(xsd_number) if String is given and is not a well-formed XSD number.

[det]xsd_time_string(?DateTime, ?Type, ?String)
Serialize and deserialize the XSD date and time formats. The converion is represented by the table below.

Prolog term Type XSD string
date(Y,M,D)xsd:dateYYYY-MM-DD
date_time(Y,M,D,H,Mi,S)xsd:dateTimeYYYY-MM-DDTHH-MM-SS
date_time(Y,M,D,H,Mi,S,0)xsd:dateTimeYYYY-MM-DDTHH-MM-SSZ
date_time(Y,M,D,H,Mi,S,TZ)xsd:dateTimeYYYY-MM-DDTHH-MM-SS[+-]HH:MM
time(H,M,S)xsd:timeHH:MM:SS
year_month(Y,M)xsd:gYearMonthYYYY-MM
month_day(M,D)xsd:gMonthDayMM-DD
Dxsd:gDayDD
Mxsd:gMonthMM
Yxsd:gYearYYYY

For the Prolog term all variables denote integers except for S, which represents seconds as either an integer or float. The TZ argument is the offset from UTC in seconds. The Type is written as xsd:name, but is in fact the full URI of the XSD data type, e.g., http://www.w3.org/2001/XMLSchema#date. In the XSD string notation, the letters YMDHS denote digits. The notation SS is either a two-digit integer or a decimal number with two digits before the floating point, e.g. 05.3 to denote 5.3 seconds.

For most conversions, Type may be specified unbound and is unified with the resulting type. For ambiguous conversions, Type must be specified or an instantiation_error is raised. When converting from Prolog to XSD serialization, D, M and Y are ambiguous. When convertion from XSD serialization to Prolog, only DD and MM are ambiguous. If Type and String are both given and String is a valid XSD date/time representation but not matching Type a syntax error with the shape syntax_error(Type) is raised. If DateTime and Type are both given and DateTime does not satisfy Type a domain_error of the shape domain_error(xsd_time(Type), DateTime) is raised.

The domain of numerical values is verified and a corresponding domain_error exception is raised if the domain is violated. There is no test for the existence of a date and thus "2016-02-31", although non-existing is accepted as valid.

9.4 library(c14n2): C14n2 canonical XML documents

C14n2 specifies a canonical XML document. This library writes such a document from an XML DOM as returned by the XML (or SGML) parser. The process takes two steps:

[det]xml_write_canonical(+Stream, +DOM, +Options)
Write an XML DOM using the canonical conventions as defined by C14n2. Namespace declarations in the canonical document depend on the original namespace declarations. For this reason the input document must be parsed (see load_structure/3) using the dialect xmlns and the option keep_prefix(true).

10 Unsupported SGML features

The current parser is rather limited. While it is able to deal with many serious documents, it omits several less-used features of SGML and XML. Known missing SGML features include

In XML mode the parser recognises SGML constructs that are not allowed in XML. Also various extensions of XML over SGML are not yet realised. In particular, XInclude is not implemented because the designers of XInclude can't make up their minds whether to base it on elements or attributes yet, let alone details.

11 Acknowledgements

The Prolog representation for parsed documents is based on the SWI-Prolog interface to SP by Anjo Anjewierden.

Richard O'Keefe has put a lot of effort testing and providing bug reports consisting of an illustrative example and explanation of the standard. He also made many suggestions for improving this document.

Index

?
current_atom/1
3.1
dtd/2
2.1 9.1
dtd_property/2
3.6
free_dtd/1
free_sgml_parser/1
get_sgml_parser/2
3.6 3.6 3.6
html_write/3
iri_xml_namespace/2
iri_xml_namespace/3
3.3.1 3.3.1
load_dtd/2
3.4
load_dtd/3
3.4
load_html/3
load_html_file/2
3.1
load_sgml/3
load_sgml_file/2
3.1
load_structure/2
3.6 3.6 3.6.1
load_structure/3
2.1 2.1 2.1 2.1 3.1 3.1 3.2 3.6
load_xml/3
load_xml_file/2
3.1
new_dtd/2
new_sgml_parser/2
number_string/2
9.3 9.3
open/4
3.4
open_dtd/3
3.4
print_message/2
3.6 3.6
print_message/3
3.6
pwp_files/2
pwp_stream/3
pwp_xml/3
seek/4
6
set_prolog_stack/2
3.1
set_sgml_parser/2
3.1 3.1 3.2 3.3.1 3.6 4
sgml_parse/2
3.1 3.6 3.6 3.6 3.6.1 6
sgml_register_catalog_file/2
7
sgml_write/3
9.1
xml_is_dom/1
xml_name/1
xml_name/2
3.3.1 9.2
xml_quote_attribute/2
xml_quote_attribute/3
9.2 9.2
xml_quote_cdata/2
xml_quote_cdata/3
9.2
xml_write/3
3.7 9.1 9.1 9.1 9.2
xml_write_canonical/3
xpath/3
xpath_chk/3
xsd_number_string/2
xsd_time_string/3
XML-Schema,lexical forms
9.3
ClioPatria (version V3.1.1-40-g9d9e003)